As an Amazon Associate I earn from qualifying purchases.1. DSLRKIT
DSLRKIT AC 100-240V to DC 48V 2A 96W Power Adapter for PoE Switch
DSLRKIT - 100v - 240v ac to dc power Adapter Charger. Input : 100v-240v 50/60Hz. Output : dc 48v 2a/2000mA 96W.
Brand | DSLRKIT |
Manufacturer | DSLRKIT |
Weight | 0.3 kg (0.66 Pounds) |
Part Number | DC48V2APOE |
Model | DC48V2APOE |
2. Das TooKii
52V Power Supply Adapter, Power Over Ethernet Plus Injector, Plug and Play, Up to 100 Meters 328 Feet, 10/100/1000Mbps RJ-45, 30W Gigabit PoE+ Injector, IEEE 802.3 at IEEE 802.3 af Compliant, 48V
Das TooKii - If you have a PoE + 802. 3at or poE 802. 3at standard device and need to use PoE technology to provide it with both network and power, this PoE adapter POE150 is your best choice. For poe equipment that meets 802. 3at or 802. 3af standards, it will communicate with the equipment and provide appropriate power.
Auto-sensing technology delivers up to 30 watts to an 802. 3at poe+ device with backward compatibility for 802. 3af poe 15. 4 watts devices. Gigabit ethernet speed: this poe injector is equipped with 1 Gigabit Ethernet port input and 1 PoE + Gigabit Ethernet port output, which can offer up to 2Gbps full-duplex Ethernet speeds.
For non-standard poe equipment, it will automatically detect and actively power off to protect the equipment. It can detect pOE equipment and non-POE equipment.
Plug and play: just connect the power cord, the 2 ports connect to network equipment and POE equipment, no configuration is required to work normally. Widely used: with hanging ears, suppport wall-mount install, etc. Businesses, widely used in homes, can be connected to PoE camera, ap, shops, private networks and other PoE fields.30 watts poe+ power supply: converts a non-poe gigabit port to a poe or poe+ gigabit port and networks a poe device located up to 100 meters.
Brand | Das TooKii |
Manufacturer | POE ST30 |
Warranty | Manufacturer warranty for 90 days from date of purchase |
3. ZHANGQING
Complaint UL FCC Certificate, PS-48V120W, ZHANGQING PoE Power Adapter 48 Volt 120 Watt Power Supply/Power Block/Power Brick for PoE Injector/PoE Switch with 2.1x5.5mm DC Connector 2.5amp UK Plug
ZHANGQING - This adapter is 110 volts to 240 volts ac input, up to 90% efficient. The ps-48v120w power supply can be used either as primary power or use to add backup failover power.
It has multiple uses if you own both PoE injectors and PoE switches. Poe 48-volt 120-watt power supply adapter suitable for most PoE injectors and PoE switches, it's able to apply for our 4/8/12/16 ports PoE injector and power switches. For more quantities of power supplies in need or custom power sources please contact us for the details.
For more other power sources please refer to the ps-24v120w, ps-48V60W, PS-56V120W, ps-56v60w, the power supplies we provided are fit to our all PoE injector and PoE switches. We provide 60 days non-human damaged warranty for the power brick, if any assistance with your order please contact us without hesitation.
Brand | ZHANGQING |
Manufacturer | ZHANGQING |
Height | 5 cm (1.97 Inches) |
Length | 20 cm (7.87 Inches) |
Weight | 670 |
Width | 10 cm (3.94 Inches) |
Part Number | PS-48V120W |
Model | PS-48V120W |
Warranty | 60 Day Warranty Against Manufacturer Defects |
4. antoble
Antoble 48v 0.5A POE Injector Adapter Power Supply UK Wall Plug Power over Ethernet for 48V POE Device
antoble - Easy to install poe adapter easy to install, plug and play, save complexity connect to AP or devices that need power supply, no need to set. Widely application 48v poe injector suitable for wireless AP, POE switch, survei.
Power supply led indicator: green light means the product is working normally. Poe power supply network interface: connect to AP or need power supply equipment. Lad port: connect to router or switch.
Premium quality uk wall plug power is made of high temperature fireproof enclosure, the use of fireproof PC+ABC material has strong impact resistance and reduces potential safety hazards. Multiple protection design poe plug is designed with short circuit protection, temperature protection, over load protection, over current protection, over voltage protection, over charge protection.
5. COLM
PoE Switch Injectors POE-8-48v60w GPOE-4A-48v48w PS-48v60w POE-8, 48V 1.25A Power Supply 60W AC Adapter Charger 5.5x2.5mm DC Jack Connector for Swann NVR, GlobTek GTM96600-6048-R2
COLM - And replacement for 48V 1. 25a 60w globtek power supply gtm96600-6048-r2, gt-41132-6048-T2. Compatible with swann nvr, and compatible eiaj-04 and eiaj-05 with our dc plug adapter.
Input voltage: 100v-240v ac 50/60hz, output: dc 48v 01a - 1. 25a, plug Connector: 5. 5mm x 2. 5mm. If you do not understand, please contact us in time, we always adhere to and provide quality after-sales support. It perfect replacement for 375ma / 520ma / 1a / / 1.0
04a / 1. 2a as amperage isnt forced. If your previous Adaptor was less than 1. 25a then this will be a perfect replacement as amperage is NOT Forced. Notice: please check the specifications of your appliance, DC interface before purchasing. Compatible with poe-8-48v60w gpoe-4a-48v48w ps-48v60w poe-8 ps-48v60w poe switch injectors, polycom vvx 411 IP Phones VVX 300 Nortel Avaya IP Phones 1110 Polycom SoundStation IP Conference Phone.
Brand | COLM |
Manufacturer | COLM |
Part Number | G-48V1.25A |
Model | 48V 1.25A Power Supply |
6. STOBOK
Black, STOBOK DC 48V 0.5A POE Injector 1PC, Ethernet Adapter UK Plug Power Supply POE Power Supply Adapter Network Adapter Power Supply for 12V 24V 48V POE Device
STOBOK - Lightning protection principle- ac input mode, 8 / 20uS current waveform, plus or minus 5 times, can withstand the impact of 5KV, the interval is one minute.
Extend the family network and the network of the office, will not be restricted by power line. Poe injector-tolerate high temperature, and protect against overcurrent, reduce short circuit, avoid lightning, overvoltage and electromagnetic.
Suitable for 12v 24v 48V POE equipment, black. Easy installation-plug and play without additional configuration. Poe power injector-prevent short circuit and provide protection against overcurrent and overvoltage. System durability = MTBF> 100k hours. 48v poe injector-in design, can easily install the adapter to areas with limited space and no configuration.
Brand | STOBOK |
Manufacturer | STOBOK |
Height | 5 cm (1.97 Inches) |
Length | 8 cm (3.15 Inches) |
Width | 4 cm (1.57 Inches) |
Part Number | 4Z2C6W122016LZ186 |
Model | 4Z2C6W122016LZ186 |
7. AZNCOS
AZNCOS AC 100-240V to DC 48V/3A 144W Power Supply Adapter AC Switching Power Transformers Interface 5.5 x 2.5mm Suitable for Routers switches control systems
AZNCOS - Output current: 3000mA. Product name: switching DC Power Supply Adapter. Output voltage: DC direct current 48V 3A. Input voltage: ac aC 100-240V. Voltage frequency: 50 / 60Hz.
8. ZHANGQING
PS-48V60W, ZHANGQING PoE Power Supply Power Adapter 48-Volt 60-Watt Adapter 2.1x5.5mm DC Connector UK & EU Plug 1.25amp Custom Power Block/Power Source with UL FCC Certificate for PoE Injector/Switch
ZHANGQING - Note: please unplug the plug when you install the power supply. For more other power sources please refer to the ps-24v120w, ps-48V120W, ps-56v60w, PS-56V120W, the power supplies we provided are fit to our all PoE injector and PoE switches.
For more quantities of power supplies in need or custom power sources please contact us for the details. The ps-48v60w power supply can be used either as primary power or use to add backup failover power.
We provide 60 days non-human damaged warranty for the power brick, if any assistance with your order please contact us without hesitation. 48-volt 60-watt power supply adapter suitable for most PoE injectors and PoE switches, it's able to apply for our 4/8/12/16 ports PoE injector. It has multiple uses if you own both PoE injectors and switches.
Brand | ZHANGQING |
Manufacturer | ZHANGQING |
Height | 5 cm (1.97 Inches) |
Length | 18 cm (7.09 Inches) |
Weight | 470 |
Width | 8 cm (3.15 Inches) |
Part Number | PS-48V60W |
Model | PS-48V60W |
Warranty | 60 Day Warranty Against Manufacturer Defects |
9. Sonew
DC12V-48V 4 Port PoE Power Adapter PoE Ethernet Power Supply Injector DC12V-48V for IP Camera
Sonew - Apply for ieee802. 3af/at standard poe powered devices like dahua, HIKVISION and other brands IP cameras, or being equipped together with IEEE802. 3af/802. 3at standard poe splitter for non POE devices. Satisfiction serviceswe solemnly promise you that if you find problems with the product itself, you can contact us in time.
Adapter devicethis poe injector is compatible with ieee802. 3af/at network devices. Please noteplease select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.
Tip: the power voltage should not be over DC48V. Conform to international safety product standards and is safe to use. This non standard passive poe injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
Easy to operateit does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802. 3af/at, the same time your powered device must support poe pin 4/5+, 7/8- midspan. High quality materialmade of plastic material, sturdy and durable to use. We will definitely give you a reply in the first place and return it for you.
Brand | Sonew |
Manufacturer | Sonew |
Height | 1 cm (0.39 Inches) |
Length | 1 cm (0.39 Inches) |
Width | 1 cm (0.39 Inches) |
Part Number | Sonew1y25k0zoeb |